Alberta or Bust

the balloon started it all, again a paper embellishment found at Treasured Memories in Edmonton Alberta.  http://treasuredmemories.typepad.com
what i loved about the balloon was the Alberta or Bust!  As any scrapbooker from Alberta knows you don't find scrapbook material for Alberta! so yah!
Then i was googling a techniques how to use distress paint and i found this fabulous tutorial from Mr. Tim Holtz how to create a patina finish
http://timholtz.com/12-tags-of-2013-april/

I used the colors i had on hand- broken china, weathered wood, gold, and spiced marigold.  Dabbed onto the splat mat and sprayed with water.

 Before i dragged the tag through the paint i used washi tape to cover a portion of one side.  I wanted to create a line in the tag

 Drag through the paint

 I dragged through a couple of times to get the coloring I wanted,
then dried

 Then i inked the edges with walnut distress ink

 i added walnut embossing powder along edges, then knocked off the excess, I also brushed off some as well, heat to set

 how it looked once i removed the tape, then repeated on the other side

 first cover the left side with tape

 paint

 ink

 add walnut embossing powder

 distresses edges and inked with walnut distress ink.  Then i added brads on either side of the line.  LOVE the final look, almost just left it the this way but alas i had to bling it up.

 cut out the balloon, then also cut out the Alberta or bust banner

 used colored twine to make the strings on the balloon

 finished look, then added the Alberta or Bust banner on top- didn't want to hide that

 chipboard gears painted black

 added black rub ons in the top corner and bottom left corner

 add gears

 balloon over top, then some more gears and brads

finished with dangling tokens attached with pins inserted into eyelets.  painted a chipboard bracket then added glossy accents on top.  TA DA!

OH snap

i was looking thru my scrapbook stash and came around this sheet of camera i brought at Treasured Memories http://www.treasuredmemories.typepad.com/ and from that the creating began

i cut out two of the camera poloraids  distress and inked the edges  i believed i used walnut and gathered twigs ( i don't take the best notes)

covered the camera cut out with large square fragment (why were these discontinued?)  used glossy accents to adhere the fragment to the camera cutout.  Distressed the fragment with alcohol ink around the outside edges. set aside and allow to dry.

using the a brick stencil i inked the top of the tag, aged maghoney, and created shadows with gathered twigs

emboss with clear embossing powder

paint mortar lines with white distress paint,  i didn't paint exactly more willy nilly,  dry

 once dry ink with gathered twigs on the whole tag, the ink will color the area not paint or embossed, creates dimension.

distress edges of tag, ink edges with walnut ink

 start adding embellishments- use what everywhere you have in your stash

 i used gears - chipboard and metal, watch gears, wind up a key, and wood elements (again picked up at Treasured memories), to rereate the lens from the camera.

finished with filmstrip

ENJOY!

Winter Sunlight

NEW TAG!!!- I live in northern Alberta Canada and it is cold, in fact this past month has been super cold -20 to -40 celicus with the wind chill.  Too cold to go outside especially when i hate winter to begin with, my crazy husband loves winter, loves it more than summer- what the hell is wrong with him?  But the great thing about Alberta is no matter how cold it is the sun is out - bright and shiny.  Here is me paying respect to my home in winter

the final tag

 use Tim Holtz ray layering stencil, inked with squeezed lemonade and wild honey distress ink.  i used the wild honey on the outside the ray and blending into the lighter/brighter squeezed lemonade.  gives it dimension (this is what i say about my hair when the roots are growing out)

 emboss with clear emboss powder, the beauty of distress ink, it also acts as embossing ink!!

 swipe splat mat with blue ink (stormy sky and iced spruce)  sptiz with water to make liquid

 run tag through ink on splat mat.  since the rays are clear embossed they can't be colored

heat to dry and repeat until you get the color of blue you want

distress edges of tag

 ink outside edge with iced spruce and just edges with walnut

pierce along outside of all the rays and stitch with twine

 BOOM- love the stitching

added the title along the outside

i didn't add a ton of embellisments because i loved how the texture background turned out.  Added a clutter with lightbulb
3-D and kraft paper in center of rays date and temp.  Finally bolts in the corners because there is never enough metal.
ENJOY!

365 days of possibilities tag

here is my first post of the new year- new year tag
finished project

here are the steps

Step 1- paint tag with weathered wood distress paint, paint twice and allow to dry

Step 2- use a harlequin stencil paint with a black dabber

Step 3- distress edges of tag and ink with a combination of vintage photo, walnut and black soot- also ink on the body of the tag

Step 4- use glossy accents to cover harlequin with- allow to dry

Step 5- use two apothecary bottles the same size fill one with stampendous embossing enamel and push cork in as deep as possible.  Add a little embossing enamel to the other leave out the cork.  glue the corked bottled on the top of the other bottle.

Step 6- use washi tape to double attach the two bottles

Step 7- glue onto dry tag

Step 8- rip a piece of corrugated cardstock, ink edges and glue along bottom of tag

Step 9- paint art parts pocket watch with black paint dabber

Step 10- add clock in center (part of my embellishment stockpile) finished with spinner

Step 11- add metal gears on the clock frame.  Use ring fasteners to thread twine across hourglass, and insert an eyelet at bottom of tag corner, thread multiple times around eyelet and tie.

Step 12- cut a banner tag, distress edges and ink then attached to top of tag with staples

Step 13- add 365 to top tag, use labeller to make bands for "days of" and "possibilities"  attach with staples.
BOOM done!


PIN IT TO PINTEREST IF YOU LIKE SO I CAN GET MORE VIEWS ON MY BLOG- PLEASE PLEASE.